IOGear Network Card M1063 User Manual

Installation Guide  
Wireless USB to VGA Adapter  
GUW2015V  
PART NO. M1063  
 
Table of Contents  
System Requirements  
Important Information  
Package Contents  
4
Frequently Asked Questions  
Technical Specifications  
Limited Warranty  
25  
26  
28  
29  
5
6
Device Overview  
7
Federal Communications Commission  
(FCC) Statement  
Wireless USB VGA Software Installation  
9
Contact  
30  
Cable Association with the Wireless USB  
Enabled PC  
12  
Connecting Wireless USB VGA Adapter  
Wireless USB VGA Display Settings  
16  
19  
24  
Wireless USB VGA Adapter in wired mode  
3
 
System Requirements  
®
- Microsoft Windows XP 32-bit (Service Pack 2)  
®
®
- Microsoft Windows Vista 32/64-bit  
- Minimum CPU requirement: 2GHz (single core), memory: 1GB*  
- Wireless USB enabled PC (embedded or via Wireless USB Host Adapter)  
- USB 2.0 Compliant hardware and system  
- Display with VGA port (VGA cable not included)  
* In order to support 720p video, minimum system requirements CPU: 2GHz (single core), RAM: 1GB.  
While playing 720p video, the system should not be doing other CPU/memory/storage consuming jobs.  
4
 
Important Information  
Before you get started, please NOTE:  
Do not place Wireless USB devices under direct sunlight or near high heat emitting devices;  
Do not place Wireless USB devices near water or wet surfaces to avoid electric hazards;  
Do not place Wireless USB devices on any moving or unstable surfaces.  
5
 
Package Contents  
1 x Wireless USB to VGA Adapter (for Monitor/TV/Projector)  
1 x USB 2.0 A to mini-B Cable (3 ft.)  
1 x Velcro fabric hook-and-loop fastener  
1 x Power Adapter (full range)  
1 x Quick Start Guide  
1 x Registration / Warranty Card  
1 x Installation CD (with User Manual)  
6
 
Device Overview  
Wireless VGA Adapter  
1
2
3
8
4
5 6 7  
7
 
4. PWR plug  
a. Power adapter socket  
Wireless VGA Adapter  
1. VGA : VGA Activity Indicator  
5. RESET  
a. LED is solid when display cable is connected  
b. LED is blinking when data is being transferred  
a. Association history can be erased by pressing and  
holding this button for 10 seconds  
6. HOST  
2. PWR: Power Indicator  
a. This button is used to select a different Wireless  
USB Host Adapter  
a. LED is solid when power is applied  
3. 1 – 2 – 3: Status Indicator  
7. USB connector  
a. Single* solid light: device is wirelessly connected to  
the selected Wireless USB Host Adapter  
b. Single* slowly blinking light: device is searching for  
a Wireless USB Host Adapter  
a. In wireless mode, this connector is used for cable  
association  
b. In wired mode, this connector is used for wired  
operation  
c. Single* quickly blinking light: device is trying to  
connect to a Wireless USB Host Adapter  
d. Rapidly scrolling lights: device is used in wired mode  
e. Three Simultaneous Blinking Lights: Cable  
Association Mode  
8. WIRED/WIRELESS switch  
a. Choose from wired or wireless mode by using this  
switch  
* Only one light at a time. The position of the light indicates  
which Wireless USB Host Adapter the device is trying to  
communicate with.  
8
 
Wireless USB VGA Software Installation  
IMPORTANT NOTE:  
If installing on Windows XP, Service Pack 2 (SP2) is required, verify that this has been installed on your PC  
before installing the Wireless USB VGA Adapter software.  
Before installing the GUW2015V  
software, please make sure that the  
Wireless USB VGA Adapter is not  
connected to the computer, and the  
Wireless USB VGA Adapter is not  
powered.  
Step 1 – Insert installation CD into drive  
on your computer.  
Step 2 - Select “Software Installation”  
from the menu.  
9
 
Step 3 – Choose installation method.  
The next screen will let you choose whether you want to install the latest software from the IOGEAR  
website or if you want to install the software directly from the installation CD.  
10  
 
If selecting Option 2: Download latest software installer from the Web, a web browser window will  
launch directing you to the IOGEAR website where you’ll find the most up-to-date software. Once you  
download the software, double-click on the .exe file to begin the installation process.  
If selecting Option 1: Install directly from CD, the installation will start automatically.  
Important: After the wizard has finished installing the software, reboot your computer if  
prompted to do so.  
11  
 
Cable Association with the Wireless USB Enabled PC  
In order to establish a secure wireless connection between the Wireless USB enabled PC and the Wireless  
USB VGA Adapter, you will need to go through the cable association process. If you have a removable  
Wireless USB host adapter, please make sure it is plugged in now.  
To start, plug the power cable into the Wireless USB VGA adapter.  
12  
 
Then use the included USB 2.0 A to mini-B cable to connect the Wireless USB VGA Adapter to your PC.  
13  
 
Windows will detect that a new device has been connected. This will automatically install the necessary  
drivers and start the Wireless USB Association process.  
Once the association process has been successfully completed, you will see the wireless connection  
status showing Association Successful. (Wording may vary depending on which software comes with your  
Wireless USB Host adapter). Click OK to close the window.  
After completing the association process, unplug the USB 2.0 A to mini B cable from the Wireless USB  
VGA Adapter.  
Windows will automatically install the Wireless USB VGA Adapter drivers.  
To verify that the connection has been successfully established, double click on your host adapter  
manager utility icon* located in the Windows system tray.  
* Please note, your host adapter manager utility icon may vary depending on which host you are running  
with the Wireless USB VGA adapter. For example, your host adapter manager utility could be Wireless  
USB Manager, UWB Manager, WiCenter or a number of other Wireless USB hosts.  
Illustration on the right is an example for your reference  
14  
 
The host adapter manager utility will display the  
Wireless USB VGA icon which shows the status  
link (signal strength ) when connected. If the  
Wireless USB VGA adapter is not connected,  
then the Wireless USB VGA icon will be grayed  
out.  
Illustration on the right is for your reference.  
Please note, your host adapter manager utility  
may vary depending on which host you are  
running with the Wireless USB VGA adapter.  
Congratulations, your Wireless USB to VGA  
Adapter is ready for use.  
15  
 
Connecting Wireless USB VGA Adapter  
Please make sure the PC is Wireless USB enabled either with embedded Wireless USB solution or with  
the Wireless USB Host Adapter plugged in before you connecting the Wireless USB VGA Adapter.  
Verify that the antenna on the Wireless USB VGA adapter is securely attached and pointed in a  
vertical position.  
Connect one end of the VGA cable (not included) to the Wireless USB VGA Adapter, and the other end to  
your displays blue VGA port.  
16  
 
For LCD Monitor/ Flat-Panel TV  
For Projector  
17  
 
You may use the included Velcro® fabric hook-and-loop fastener to attach the Wireless USB VGA adapter  
to your projector or LCD display in order to ensure a good line-of-sight signal with the Wireless USB Host  
adapter.  
Change your displays setting to select VGA as your input device. Please refer to the operating instructions  
supplied with your display.  
18  
 
Wireless USB VGA Display Settings  
By default, the display monitor connected to the Wireless USB VGA adapter will be set to the best  
resolution and will extend your screen to the right. You may change the screen mode and the operation  
mode by double clicking on the Monitor icon in the Windows system tray.  
A menu will appear and you will have the ability to  
change parameters such as resolution, color  
quality, mirror mode or extension mode and more.  
You may also modify your display settings by  
going into control panel and double click on the  
Display icon for Windows XP or Personalization  
icon for Vista.  
19  
 
Video Mode Configuration  
as shown above, another is to go to Control  
Panel, double click on “Display”, then choose  
“Settings” tab.  
By default, your installation will be set with the  
best resolution for your computer and will extend  
your screen to the right. You may change the  
screen mode and the operation mode.  
Mirror Mode  
Mirror mode duplicates the primary display to  
the monitor connected to the Wireless USB VGA  
Adapter.  
Note: If no output is seen on the monitor con-  
nected to the Wireless USB VGA Adapter, it may  
be in a mode which cannot be displayed by the  
monitor. This can happen if the monitor does  
not have its supported modes to the Wireless  
USB VGA Adapter. Reduce the resolution of the  
primary display until an image is shown.  
The resolution, color depth and refresh rate of the  
primary screen will be replicated to the monitor  
connected to the Wireless USB VGA Adapter.  
If the monitor connected to the Wireless USB  
VGA Adapter supports a lower resolution than  
the primary display, then a part of the screen is  
shown on the mirrored display. As the mouse is  
moved around the screen, the Wireless USB VGA  
Adapter display will scroll to the current area.  
There are two options to adjust the Resolution,  
Color Quality, Screen Rotation, and Extended  
or Mirror Mode. One is to click on the IOGEAR  
DisplayLink Manager icon in the Windows tray  
20  
 
To set up the Wireless USB VGA Adapter to mirror  
the primary display:  
1. Go to the “Settings” tab of the Display  
Properties page  
2. Click on the Monitor connected to the  
“IOGEAR Wireless USB VGA adapter”  
3. Ensure that “Extend my Windows desktop  
onto this monitor” is Unchecked  
4. Click “Apply”  
21  
 
Extended Mode  
Extended mode extends the desktop across  
multiple monitors.  
To set up extended mode:  
1. Go to the “Settings” tab of the Display  
Properties page  
2. Click on the Monitor connected to the  
“IOGEAR Wireless USB VGA adapter”  
3. Ensure that “Extend my Windows desktop  
onto this monitor” is checked  
4. Click “Apply”  
The orientation of the screens can also be adjusted  
by dragging the location of the blue screens to  
match the actual physical layout.  
22  
 
Screen Refresh Rate Configuration  
To adjust the refresh rate of the extended screen,  
click on “Advanced” and then the “Monitor” tab.  
23  
 
Wireless USB VGA Adapter in Wired Mode  
Your Wireless USB VGA Adapter can also be used in wired mode. Make sure the position of the WIRED/  
WIRELESS switch is in the WIRED position. Plug the USB cable between your computer and the Wireless  
USB VGA Adapter. The function is the same as the wireless mode but data will be transferred through the  
cable and does not require the use of the Wireless USB Host Adapter.  
24  
 
Frequently Asked Questions  
For the latest FAQs, please go to IOGEAR website (www.iogear.com).  
1. My Wireless USB Host Adapter is plugged into my computer and my Wireless USB VGA Adapter is  
powered but I do not see anything on my display. Whats wrong?  
Check the host adapter manager utility provided by your Wireless USB Host Adapter (PC side) to  
see if there is an icon for your Wireless USB VGA Adapter. If there is no icon, try unplugging and  
plugging in your Wireless USB Host Adapter to reload the Wireless USB VGA Adapter.  
Still not connected?  
Double check that the radio from your Wireless USB host adapter is on.  
2. Why is my video choppy?  
If you are experiencing choppy video, try changing the channel in the hsot adapter manager utility  
provided by your Wireless USB Host Adapter or move in your computer closer to the display.  
25  
 
Technical Specifications  
Specifications  
Function  
GUW2015V  
Operating System Support  
PHY Data Rate  
Microsoft XP 32-bit; Microsoft Vista 32/64-bit  
53.3Mbps, 80Mbps, 106.6Mbps, 160Mbps,  
200Mbps, 320Mbps, 400Mbps, 480Mbps  
Operating Range  
Frequency  
Up to 30 feet (10 meters)  
3.1GHz to 4.8GHz (WiMedia Band Group 1)  
7 channels (3 FFI + 4 TFI)  
QPSK/DCM  
Number of Channels  
RF Modulation Type  
Interface  
VGA  
Video Resolution  
Up to UXGA (1600x1200) or WSXGA+  
(1680x1050)  
Video Streaming  
Up to 720p (720p only available at resolution  
1280x720 or lower)  
26  
 
Screen Mode  
Extended and Mirror mode  
32-bit True Color  
Color Depth  
USB Specification  
Association Mode  
Certified Wireless USB 1.0; USB 2.0  
Cable Association; Stores up to 16 Associated  
Hosts  
Native Mode  
Antenna Type  
Reset Switch  
For playback of high resolution video  
Omni directional  
Used for erasing association history by pressing  
and holding this button for 10 seconds  
Power Consumption  
Max Output Power  
Power Adapter  
Wireless VGA Adapter: 3.3W  
-41.3 dBm/MHz  
5V, 2A; 100-240VAC  
27  
 
Limited Warranty  
IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT,  
DISK, OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT.  
The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to  
the contents or use of this documentation, and especially disclaims its quality, performance,  
merchantability, or fitness for any particular purpose.  
The direct vendor also reserves the right to revise or update the device or documentation without  
obligation to notify any individual or entity of such revisions, or updates. For further inquiries please  
contact IOGEAR.  
28  
 
Federal Communications Commission (FCC) Statement  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) this device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation. This device is authorized under 47  
CFR 15.519 (the FCC Rules and Regulations). The operation of this device is subject to the following  
restriction: This UWB device shall transmit only when it is sending information to an associated receiver.  
This UWB device shall cease transmission within 10 seconds unless it receives an acknowledgement from  
the associated receiver that its transmission is being received. An acknowledgement of reception must  
continue to be received by the transmitting device at least every 10 seconds of operation or the UWB  
device must cease transmitting.  
29  
 
Contact  
IOGEAR  
23 Hubble  
Irvine, CA 92618  
P 949.453.8782  
F 949.453.8785  
®
© 2008 IOGEAR Part No. M1063  
IOGEAR, the IOGEAR logo, are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and Windows are registered trademarks of  
Microsoft Corporation. All other brand and product names are trademarks or registered trademarks of their respective holders. IOGEAR makes  
no warranty of any kind with regards to the information presented in this document. All information furnished here is for informational purposes  
only and is subject to change without notice. IOGEAR, Inc. assumes no responsibility for any inaccuracies or errors that may appear in this  
document.  
30  
 
31  
 
About Us  
FUN  
IOGEAR offers connectivity solutions that are innovative, fun, and stylish,  
helping people enjoy daily life using our high technology products.  
GREEN  
IOGEAR is an environmentally conscious company that emphasizes the  
importance of conserving natural resources. The use of our technology solutions  
helps reduce electronic waste.  
HEALTH  
IOGEAR supports healthy and fit lifestyles. By integrating products with  
the latest scientific developments, IOGEARs solutions enhance the life of  
end-users.  
®
© 2008 IOGEAR  
 

Ingersoll Rand Paint Sprayer 210CSA User Manual
Insignia Car Satellite TV System 40D510MX15 User Manual
Insignia Work Light NS 46E440NA14 User Manual
Intel Computer Hardware 62230ANHMWWB User Manual
JBL Speaker System LS Series User Manual
Jenn Air Refrigerator 12642718 User Manual
Johnson Hardware Door 100SD Series User Manual
Kenmore Refrigerator 7957205 User Manual
KitchenAid Food Warmer 4452827 User Manual
KitchenAid Ventilation Hood KICU465S User Manual