IOGear Switch GCS1782 User Manual

Installation Guide  
USB 2.0 DVI KVMP Switch  
GCS1782 / GCS1784  
PART NO. M1024  
 
Table of Contents  
Package Contents  
Requirements  
5
Advanced Configuration  
- Hotkey setting mode  
20  
21  
22  
24  
6
Operating systems  
Components  
7
- Summary of Hotkey Settings  
8
- Comparison of Default and  
Alte Manual Port selection settings  
Hardware Setup  
Basic Operation  
12  
14  
14  
15  
16  
16  
18  
- Firmware up-grade mode  
- Keyboard Operating platform  
The Firmware Upgrade Utility  
Troubleshooting  
25  
26  
30  
34  
35  
40  
- Manual port selection  
- Hotkey Switching  
- Port ID numbering  
- Direct port selection  
- Auto Scanning  
Specifications  
Limited Warranty  
3
 
Conventions  
This manual uses the following conventions:  
Monospaced Indicates text that you should key in.  
[ ] Indicates keys you should press. For example, [Enter] means to press the Enter key. If keys  
need to be chorded, they appear together in the same bracket with a plus sign between them:  
[Ctrl+Alt].  
1. Numbered lists represent procedures with sequential steps.  
Bullet lists provide information, but do not involve sequential steps.  
−>Indicates selecting the option (on a menu or dialog box, for example), that comes next. For  
example, Start −> Run means to open the Start menu, and then select Run.  
Indicates critical information.  
4
 
Package Contents  
1 USB 2.0 DVI KVMP Switch  
[GCS1782] 2-Custom KVM Cable Sets (6ft)  
[ GCS 1784] 4 custom Cable sets (6ft)  
2 7.1 Audio cables (6ft) [GCS1782 only]  
1 USB-to-PS/2 Converter  
1 Firmware Upgrade Cable  
1 Power Adapter  
1 User Manual  
1 Registration form  
Verify All the components are present and that nothing was damaged in shipping. If you encounter a  
problem, contact your dealer, or IOGEAR.  
Read this manual thoroughly and follow the installation and operation procedures carefully to prevent  
any damage to the unit, and/or any of the devices connected to it.  
5
 
Requirements  
Computers  
A USB mouse  
A DVI-D port  
A USB keyboard  
USB Type A port  
Audio ports (optional)  
Microphone and speakers (optional)  
Monitor with a DVI input  
Cables  
Two (6 ft) DVI-D KVM custom cable sets  
are provided with this package, which  
incorporates cables for microphones (pink)  
and 2.1 channel surround sound speakers  
(green)  
Two additional 6 ft audio cables are  
included for 7.1 sound and are used in  
conjunction with the 2.1 audio cables on  
the KVM cable  
6
 
Operating Systems  
OS  
Distribution  
Version  
Windows  
Linux  
2000 and higher  
9.0 and higher; Fedora Core 4 and higher  
9.0 and higher  
RedHat  
SuSe  
Unix  
AIX  
4.3 and higher  
FreeBSD  
Sun  
4.2 and higher  
Solaris 9 and higher  
6.0 and higher  
Novell  
MAC  
Netware  
OS 9.0 and higher  
Note: Supports Linux Kernel 2.6 and higher.  
7
 
Components  
Front View  
1
3
4
2
8
 
No Component  
Description  
1
Port Selection  
Pushbuttons  
Press a pushbutton for longer than two seconds to bring the KVM, USB,  
and audio focus to the computer attached to its corresponding port.  
2
Port LEDs  
The Port LEDs are located below the Port Selection Pushbuttons. The  
upper one (Orange) are the KVM Port LEDs; the lower ones (Green) are  
the USB LEDs:  
KVM Lights DIM ORANGE to indicate that the computer attached to  
the port is (On Line). Changes to BRIGHT ORANGE to indicate that  
the computer attached that port has KVM focus (Selected). Flashes to  
indicate that the computer attached to its port is in Auto Scan mode.  
USB Lights GREEN to indicate that there is a USB connection to the  
computer attached to the port. Changes to BRIGHT GREEN to indi-  
cate that the computer attached has access to the USB peripherals.  
3
4
Console Ports (Audio)  
Connections for your microphone and 2.1 speakers  
USB 2.0 Peripheral Port Connection for a USB peripheral device ( printer, scanner, etc.)  
9
 
Rear View  
1
2
3
4
5
6
10  
 
No. Component  
Description  
1
2
3
4
Firmware Upgrade Port Connection for the firmware up grade cable  
USB Console Ports  
Console Port Section  
CPU Port Section  
USB1.0 Keyboard and mouse connections*  
Connections for your monitor, mike, and speakers  
Connections for the cables that link the switch to your computers. Each  
CPU port is comprised of a microphone jack, speaker jack, USB type B  
socket and a DVI connector  
5
6
Power Jack  
Power adapter connection  
USB Peripheral Port  
Connection for USB 2.0 peripherals ( printers, scanners, etc)  
11  
 
Hardware Setup  
Make sure that power to all the devices you will be installing has been turned off. You must  
unplug the power cords of any computers that have the Keyboard Power On function.  
Cable Connection  
To set up your GCS1782 installation, refer to the installation diagrams on the following pages (the  
numbers in the diagrams correspond to the steps, below), and do the following:  
1. Connect your USB keyboard and mouse into the USB Console Ports located on the units back  
panel.  
2. Connect your microphone, speakers, and monitor into the Console ports located on the units rear  
panel  
Note: The IOGEAR KVM cable set provided 2.1 channel surround sound only. You must use the  
included audio cable for 7.1 audio  
3. Using the KVM cable set, connect the DVI connector into any available DVI socket in the CPU Port  
setion of the switch, then connect the accompanying USB, microphone and speaker connectors  
into their corresponding USB, microphone, and speaker sockets.  
12  
 
4. At the other end of the cable, connect the  
USB, video, microphone, and speaker cables  
into their respective ports.  
5
5. Connect your USB peripherals into the type  
A sockets (one is located on the front, the  
second is located on the rear).  
1
2
3
6. Connect the power adapter that came with  
your switch into the jack on the switch then  
connect the adapter to an AC power source.  
7. Verify your connections: ports are correct and  
that the Icons match the connection type  
6
2
8. Power on the computers.  
5
4
13  
 
Basic Operation  
Manual Switching  
There are two convenient methods to access the computers: Manual – pressing the port selection  
pushbuttons located on the units front panel; and Hotkey – entering key combinations from the  
keyboard. Hotkey port selection is discussed in the next chapter.  
Manual port selection:  
Press and release a port selection pushbutton to focus the computer on the corresponding port. The  
USB and Audio focus do not change (expect a 2 sec delay).  
Press a port selection pushbutton twice to focus the audio on the corresponding port (expect a 2  
sec delay).  
Press and hold a port selection pushbutton for more than 2 seconds to focus KVM, USB, Audio and  
the computer on the corresponding port.  
Press and hold port selection pushbuttons 1 and 2 for more than 2 seconds to start Auto Scan  
Mode, at 5seconds dwell time (default).  
14  
 
Hotkey switching  
All port switching begins by tapping the Scroll Lock key twice. The tables below describe the actions  
that each combination performs.  
Note:  
If the Scroll Lock key conflicts with other programs running on the computer, see the section titled  
Advanced Switching to switch to the alternate method.  
Cycling though the ports  
Hotkey  
Action  
[Scroll Lock] [Scroll Lock] [Enter]  
Increments the KVM, USB, and Audio focus to the next  
higher port (GCS1784 - 4 wraps to 1)  
[Scroll Lock] [Scroll Lock] [K] [Enter]  
[Scroll Lock] [Scroll Lock] [U] [Enter]  
[Scroll Lock] [Scroll Lock] [S] [Enter]  
Increments only KVM to the next port  
Increments only USB to the next port*  
Increments only Audio to the next port  
* The USB ports are locked together, therefore they cannot be independently switched.  
15  
 
Port ID Numbering  
Each CPU port on the switch is assigned a port number (1 or 2 for the GCS1782 and 1,2,2,4 for the  
GCS1784). The port numbers are marked on the rear panel of the switch and each switch LED has  
a corresponding number for easy identification.  
The Port ID of a computer is derived from the CPU port number it is connected to. For example, a  
computer connected to CPU port 2 has a Port ID of 2.  
The Port ID is used to specify which computer gets the KVM, USB peripheral, and / or audio focus  
with the Hotkey port selection method.  
Going Directly to a Port  
Note: The n stands for the computers Port ID number. Replace the n with the appropriate Port ID  
when entering hotkey combinations  
16  
 
Hotkey  
Result  
[Scroll Lock[ScrollLock][n][Enter]  
Brings the KVM, USB hub, and audio focus to the computer  
attached to the specified port.  
[Scroll Lock] [Scroll Lock][n] [K] Enter]  
[Scroll Lock] [Scroll Lock] [n] [U] [Enter]  
[Scroll Lock] [Scroll Lock] [n] [S] [Enter]  
Brings only the KVM focus to the computer attached to the  
specified port.  
Brings only the USB hub focus to the computer attached  
to the specified port.  
Brings only the audio focus to the computer attached to  
the specified port.  
[Scroll Lock] [Scroll Lock] [n] [K] [U] [Enter] Brings the KVM and USB hub focus to the computer  
attached to the specified port  
[Scroll Lock] [Scroll Lock] [n] [K] [S] [Enter] Brings the KVM and audio focus to the computer attached  
to the specified port.  
[Scroll Lock] [Scroll Lock] [n] [U] [S] [Enter] Brings the USB hub and audio focus to the computer  
attached to the specified port.  
17  
 
Auto Scanning  
The GCS1782s Auto Scan feature automatically cycles the KVM focus through the computer ports  
at regular intervals. This allows you to monitor computer activity without having to switch from port  
to port manually.  
Note:  
1. The n stands for the number of seconds that the CS1782 should dwell on a port before  
moving on to the next. Replace the n with a number between 1 and 99 when entering this hotkey  
combination.  
2. While Auto Scan Mode is in effect, ordinary keyboard and mouse functions are suspended – only  
Auto Scan Mode compliant keystrokes and mouse clicks can be input. You must exit Auto Scan  
Mode in order to regain normal control of the console (hit the space bar or the Esc key).  
3. Although the video focus switches from port to port, the keyboard, mouse, and USB focus do not  
switch. They remain on the port when Auto Scanning began.  
18  
 
Hotkey  
Result  
[Scroll Lock] [Scroll Lock] [A] Enter]  
Invokes Auto Scan. The KVM focus cycles from port to port at  
5 second intervals (default interval)  
[Scroll Lock] [Scroll Lock] [A] [n] Enter] The KVM focus cycles from port to port at n second intervals.  
19  
 
Advanced Configuration  
Advanced Configuration  
Hotkey Setting Mode  
In some instances the default hotkey settings conflict with programs running on your computer, and in  
some instances the default hotkeys either do not exist on your keyboard (MAC keyboards for instance  
do not have a Scroll Lock key), or are inconvenient to use, so The Hotkey Setting Mode allows you to  
select alternate configurations for the KVMs hotkeys.  
When HSM is active, the Caps Lock, and Scroll Lock LEDs flash in succession to indicate that HSM is  
in effect. They stop flashing and revert to normal status when you exit HSM.  
Ordinary keyboard and mouse functions are suspended – only Hotkey compliant keystrokes and  
mouse clicks (described in the sections that follow), can be input.  
At the conclusion of some hotkey operations, you automatically exit hotkey mode. With some  
operations, you must exit manually. To exit HSM manually, press the Esc key, or the Spacebar.  
20  
 
Invoking Hotkey Setting Mode (Default)  
1. Press and hold down [Num Lock] (the Clear key on MACs).  
2. Press and release [-].  
3. Release [Num Lock] (the Clear key on MACs).  
To Toggle to or from the alternate Hotkey Setting Mode (HSM):  
1. Press and hold down [Num Lock].  
2. Press and release [-].  
3. Release [Num Lock].  
4. Press and release [H].  
Invoking Hotkey Setting Mode (Alternate)  
1. Press and hold down [Ctrl].  
2. Press and release [F12].  
3. Release [Ctrl].  
NOTE: The term “invoke HSM” in the following table refers to the method chosen above  
21  
 
Summary of Hotkey Settings  
Action  
Key sequence  
Result  
Port Switching  
Invoke your HSM  
Changes the [Scroll Lock] key to [Ctrl]  
Press and release [T]  
USB reset  
1. Invoke HSM.  
Resets the USB peripheral ports  
2. Press and release [F5]  
Restore Default Settings  
Hotkey Beeper Control  
1. Invoke HSM.  
2. Press [R] [Enter].  
Reset the KVM to its default hotkey set-  
tings  
1. Invoke HSM.  
Toggles the Beeper On and Off  
2. Press [B]  
Disable Port Switchin Hot Keys 1. Invoke HSM  
2. Press [X] [Enter]  
Toggles Hotkey Switching on or off  
Other OS Mode  
1. Invoke HSM  
2. Press [F1].  
Reset keyboards and mice under some  
special OSs that do not support USB 2.0  
Mouse Emulation Control  
1. Invoke HSM  
2. Press [M].  
Allows the special programming of multi-  
function mice to operate through the KVM  
22  
 
List Hotkey Settings  
1. Open a word processor Prints a list of the current hotkey settings in  
2. Invoke HSM.  
your text editor or word processor  
3. Press and release [F4].  
Display Emulation Technology 1. Invoke HSM  
2. Press and release [D]  
Display Emulation Technology remembers  
the brand and display information of the  
monitor attached to the KVM. It eliminates  
the problem of your display reverting to  
default resolution when switching between  
computers, or displaying a default  
resolution if the KVM is not focused on the  
computer while it is booting.  
Alternative Manual Port  
Selection Settings  
1. Invoke HSM  
2. Press and release [S]  
Toggles between the default and the  
alternative front panel pushbutton port  
selection settings See the table on the  
following page for comparisons  
23  
 
Comparison of Default and Alternate Manual Port Selection Settings  
Action  
Default  
Alternate  
Press and release a port  
selection pushbutton  
Switches only the KVM  
focus to the selected port the selected port  
KVM, Audio and USB focus switch to  
Press a port selection pushbutton  
twice  
Audio focus switches to  
the selected port  
Audio focus switches to the selected  
port  
Press and hold a port selec-  
tion pushbutton for more than 2  
seconds  
KVM focus, USB, and  
Audio focus switch to the to the selected port  
selected port  
Switches only the KVM focus  
Press and hold port selection push- Starts AutoScan @ 5 sec  
Starts AutoScan at 5 sec dwell  
buttons 1 and 2 for more  
than 2 seconds  
dwell  
24  
 
Firmware Upgrade Mode  
To set the KVM to Firmware Upgrade Mode:  
1. Invoke your HSM.  
2. Key in: upgrade  
3. Press [Enter].  
The front panel LEDs flash to indicate Firmware Upgrade Mode is in effect. To exit Firmware Upgrade  
Mode, you must power off the switch. See The Firmware Upgrade Utility for details  
25  
 
Keyboard Operating Platform  
The KVMs default port configuration is for a PC compatible keyboard operating platform. If your con-  
sole uses a PC compatible keyboard and you have a Mac or Sun attached to a port, for example, you  
can change the ports keyboard operating platform configuration so that the PC compatible keyboard  
emulates the Mac or Sun keyboard.  
1. Bring the KVM focus to the port you want to set.  
2. Invoke HSM.  
3. Press and release the appropriate Function key (see table below).  
Function Key  
[F2]  
Operation  
Enables Mac keyboard emulation, see Mac Keyboard Emulation,  
Enables Sun keyboard emulation, see Sun Keyboard Emulation  
[F3]  
[F10]  
Disables keyboard emulation. Key presses are passed straight through.  
When your console uses a Mac keyboard to access a Mac attached to a  
port, for example  
After completing this procedure, you automatically exit HSM.  
26  
 
The PC compatible (101/104 key) keyboard can emulate the functions of Mac and Sun keyboards  
when the Control key [Ctrl] is used in conjunction with other keys.  
The emulation mappings are listed in the table on the next page.  
27  
 
PC Keyboard  
[Shift]  
Mac Keyboard  
PC Keyboard  
[Ctrl] [T]  
Sun Keyboard  
Stop  
Shift  
Ctrl  
[Ctrl]  
[Ctrl] [F2]  
[Ctrl] [F3]  
Again  
Props  
[Ctrl] [1]  
[Ctrl] [F4]  
Undo  
[Ctrl] [2]  
[Ctrl] [3]  
[Ctrl] [4]  
[Ctrl] [F5]  
[Ctrl] [F6]  
[Ctrl] [F7]  
Front  
Copy  
Open  
[Alt]  
Alt  
[Ctrl] [F8]  
[Ctrl] [F9]  
[Ctrl] [F10]  
Paste  
Find  
Cut  
[Print Screen]  
[Scroll Lock]  
F13  
F14  
28  
 
PC Keyboard  
Mac Keyboard  
=
PC Keyboard  
[Ctrl] [1]  
Sun Keyboard  
[Enter]  
Return  
Delete  
Help  
[Ctrl] [2]  
[Ctrl] [3]  
[Ctrl] [4]  
[Ctrl] [H]  
[Backspace]  
[Insert]  
F15  
Help  
[Ctrl]  
Compose  
Note: Press and release the first key [Ctrl], then press and release  
Note: Press and release the first key [Ctrl], then press and release the activation key.  
the activation key.  
29  
 
The Firmware Upgrade Utility  
The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides a smooth, automated  
process for upgrading the KVM switchs rmware.  
The Utility comes as part of a Firmware Upgrade Package that is specific for each device. New firmware  
upgrade packages are posted on our Website as new firmware revisions become available. Check the  
web site regularly to find the latest packages and information relating to them.  
Before you Begin  
To prepare for the firmware upgrade, do the following:  
1. From a computer that is not part of your KVM installation ( disconnect the computer from the KVM)  
go to our Internet support site and choose the model name that relates to your device (GCS1782)  
to get Firmware Upgrade Packages.  
2. Choose the Firmware Upgrade Package you want to install (usually the most recent), and down-  
load it to your computer.  
3. Use the Firmware Upgrade Cable provided with this unit, to connect a COM port on your computer  
to the Firmware Upgrade Port of your switch.  
4. Shut down the computers on your CS1782 installation.  
5. Invoke Firmware Upgrade Mode.  
The front panel LEDs flash together to indicate Firmware Upgrade Mode is in effect.  
30  
 
Starting the Upgrade  
To upgrade your firmware:  
1. Run the downloaded Firmware Upgrade Package file – either by double clicking the file icon, or by  
opening a command line and entering the full path to it.  
The Firmware Upgrade Utility Welcome screen appears.  
2. Read the License Agreement (enable the I Agree radio button).  
3. Click Next to continue. The Firmware Upgrade Utility main screen appears.  
The Utility inspects your installation. All the devices capable of being upgraded by the package are  
listed in the Device List panel.  
4. As you select a device in the list, its description appears in the Device Description panel.  
5. After you have made your device selection(s), Click Next to perform the upgrade.  
If you enabled Check Firmware Version, the Utility compares the devices rmware level with that of  
the upgrade files. If it finds that the devices version is higher than the upgrade version, it brings up a  
dialog box informing you of the situation and gives you the option to Continue or Cancel.  
31  
 
If you didn’t enable Check Firmware Version, the Utility installs the upgrade files without checking  
whether they are a higher level, or not. As the Upgrade proceeds, status messages appear in the  
Status Messages panel, and the progress toward completion is shown on the Progress bar.  
After the upgrade has completed, a screen appears to inform you that the procedure was successful.  
Click Finish to close the Firmware Upgrade Utility.  
After a successful completion, the switches exit Firmware Upgrade Mode, and reset themselves.  
32  
 
Upgrade Failed  
If the Upgrade Succeeded screen doesn’t appear, it means that the upgrade failed to complete  
successfully, in which case you should do the following:  
1. Power off the CS1782 and remove its housing.  
2. Using a jumper cap, short the jumper on the mainboard labeled J17. The diagram below indicates  
the jumper location on the CS1782 board:  
3. Power on the CS1782. It will now work with the factory default firmware.  
4. Do the firmware upgrade procedure again.  
5. After the upgrade procedure completes, power off the switch, remove the jumper cap from J17,  
close the housing, and power the CS1782 on again.  
33  
 
Troubleshooting  
Symptom  
Possible Cause  
Action  
Mouse / Keyboard not  
responding.  
Improper mouse and/  
or keyboard reset.  
Unplug the cable(s) from the console  
port(s),then plug it/them back in.  
USB devices not  
responding.  
KVM switch needs to  
be reset.  
Power off all devices on the installation. Power  
off the KVM switch; wait five seconds; then  
power up  
There are ghost images  
on the external monitor.  
USB ports need to  
reset.  
Unplug the devices USB cable from the USB  
port on the switchs rear panel, then plug it  
back in.  
PC or OS does not  
support USB 2.0.  
The CS1782 has a built-in USB 2.0 hub, so  
will not support PCs or OS that do not support  
USB 2.0.  
The distance between the external console and the CS1782 is too great.  
The maximum VGA cable distance should not exceed 20m and, in some  
cases, may need to be shorter. Replace the VGA cable with one of an  
appropriately short length.  
34  
 
Specifications  
Function  
GCS1782 (GCS1784*)  
Computer Connections 2 (4)  
CPU Port Selection  
Console Connectors  
Front Panel Pushbuttons; Hotkey  
Keyboard  
Mouse  
Video  
1 x USB Type A F (black, rear panel)  
1 x USB Type A F (black, rear panel)  
1 x DVI-I F (white)  
Audio  
Line Out Port  
2 x Mini Stereo Jack F (green; 1 x  
front panel, 1 x rear panel  
Line In Port  
1 x Mini Stereo Jack F (blue)  
Microphone Port  
2 x Mini Stereo Jack F (pink; 1 x  
front panel, 1 x rear panel)  
Side Speaker Out Port  
1 x Mini Stereo Jack F (gray)  
Rear Speaker Out Port 1 x Mini Stereo Jack F (black)  
Center/Subwoofer Port 1 x Mini Stereo Jack F (orange)  
35  
 
Function  
GCS1782 (GCS1784)  
Power Consumption  
DC 5.3V, 4.8W  
* The GCS1784 provides 2.1 sound only  
36  
 
Function  
GCS1782 (GCS1784)  
2 x USB 1.1 Type B (white)  
2 (4) x DVI-I F (white)  
Line Out Port  
KB / Mouse  
Video  
Audio  
2 (4) x Mini Stereo Jack F (green)  
2 (4) x Mini Stereo Jack F (blue)  
2 (4) x Mini Stereo Jack F  
Line In Port  
Microphone Port  
Computer  
Connectors  
Side Speaker Out Port  
Rear Speaker Out Port  
Center/Subwoofer Port  
1 x 4-conductor 3.5 mm Jack  
1 x DC 5.3V Jack  
2 (4) x Mini Stereo Jack F (gray)  
2 (4) x Mini Stereo Jack F (black)  
2 (4) x Mini Stereo Jack F (orange)  
F/W Upgrade  
Power  
USB Hub  
2 x USB 2.0 Type A (black)  
37  
 
Switches  
LEDs  
Selected  
On Line  
2 (4) x Pushbutton  
2 (4) (Orange)  
2 (4) (Green)  
USB Link  
38  
 
Video Specifications  
DVI-D:  
2560 x 1600 @ 60Hz (Dual Link);  
supports Apple 20”, 23”, 30” Cinema Display;  
supports Viewsonic 22” LCD monitor  
DVI-A:  
2048 x 1536; DDC2B  
Supports Special monitors to 3840 x 2400 @  
13Hz (Single Link);  
39  
 
Limited Warranty  
The manufacturer, IOGEAR, makes NO warranty or representation, whether express or implied,  
regarding the contents, use or suitability of this software, disk or documentation. IOGEAR specifically  
disclaims any and all warranties regarding the quality and performance of this software, disk or docu-  
mentation including, but not limited to the implied warranty of merchantability and implied warranty  
of fitness for a particular purpose. IOGEAR shall not be responsible or liable for property damage,  
loss of use, interruption of business, lost profits, lost data or other consequential, punitive or special  
damages, however caused and however alleged.  
IOGEAR reserves the right to revise or update the software, disk or documentation without advance  
notification of such revision or update. For additional information please contact IOGEAR at: Email –  
support@iogear.com, Telephone - 949-453-8782 or toll free 866-9-IOGEAR, or Fax - 949-453-8785.  
40  
 
Contact  
Toll Free: (866) 9-IOGEAR  
Phone: (949) 453-8782  
23 Hubble  
Irvine, CA 92618 USA  
support@iogear.com  
41  
 
42  
 
43  
 
About Us  
FUN  
IOGEAR offers connectivity solutions that are innovative, fun, and stylish,  
helping people enjoy daily life using our high technology products.  
GREEN  
IOGEAR is an environmentally conscious company that emphasizes the  
importance of conserving natural resources. The use of our technology solutions  
helps reduce electronic waste.  
HEALTH  
IOGEAR supports healthy and fit lifestyles. By integrating products with  
the latest scientific developments, IOGEARs solutions enhance the life of  
end-users.  
© 2008 IOGEAR, INC.  
 

Ingersoll Rand Water Pump 650883 XXX B User Manual
Jet Tools Cordless Saw HBVS 7MW User Manual
Jonsered Lawn Mower LM2146 CD User Manual
JVC Home Security System UX H300 User Manual
Kenmore Clothes Dryer 8907 User Manual
Kenwood GPS Receiver DDX7036BT User Manual
KitchenAid Ice Maker KUIS15NRHB8 User Manual
Koblenz Thorne Electric Vacuum Cleaner U 80 User Manual
Kramer Electronics Switch VP 720DS User Manual
Kramer Electronics Webcam RC 10TB User Manual